SENIOR LECTURER

AWAH, CHUKWUEMEKA CHIJIOKE

AWAH, CHUKWUEMEKA CHIJIOKE

Senior Lecturer

Biography

PERSONAL DATA

Name Chukwuemeka Chijioke AWAH

 

Qualifications B.Eng. (Nig.), M.Eng. (Nig.), Ph.D. (Sheffield)

 

Current Postal Address Department of Electrical and Electronic Engineering

Michael Okpara University of Agriculture, Umudike
P.M.B 7267, Umuahia, Abia State, Nigeria.

Mobile +234-8034221305
Email awah.chukwuemeka@mouau.edu.ng    ccawah@ieee.org   awahchukwuemeka@gmail.com

Nationality: Nigerian

Religion: Christianity  

Sex : Male

Marital status: Married

 

EDUCATION
University of Sheffield, United Kingdom [2012–2016] Obtained a PhD degree in Electronic and Electrical Engineering    [Specialty=Electrical machines and drives] (2016).

 

University of Nigeria, Nsukka       [2007–2009] Obtained M.Eng with Distinction in Electrical Engineering [Specialty= Power devices: Electrical machines and drives] (2009).

 

University of Nigeria, Nsukka   [1999–2005] Obtained a B.Eng. (Honors) Second Class Upper Division in   Electrical Engineering [CGPA=4.11] (2005).

 

Igwebuike Grammar School, Awka [1992–1998] Obtained the West African School Certificate.

 

EMPLOYMENT

 

  • Michael Okpara University of Agriculture, Umudike(MOUAU)
  • Position: Senior Lecturer ` October 2020–Date
  • Position: Lecturer I 2016–Sept. 2020
  • Position: Lecturer II April 2009– 2016
  • Graduate Assistant ( 2007–March 2009)

 

  • Shalom Academy, Nsukka (One of the Best Private Secondary School) (March 2007–August 2007)
  • Position: Physics Teacher
  • National Youth Service at the Government Secondary School, Akassa, Bayelsa State
  • Position:  Mathematics Teacher (2006)

 

TEACHING EXPERIENCE / SUPERVISION

  • Ordinary Level (High School): Physics and Mathematics (2006–2007)
  • Teaching of Electrical Engineering Undergraduate Courses: Electrical machines, Power systems, etc. (2007–Date)
  • Supervision of Undergraduate Projects (2007–Date)
  • Teaching of Electrical Engineering Postgraduate Courses (2017–Date)
  • Supervision of Postgraduate Projects/Thesis (2017–Date)

 

POSITIONS HELD

  • Bachelor of Engineering Project Co-ordinator, Dept. of Electrical& Electronic Engineering, MOUAU (2008–2012)
  • Departmental SIWESCoordinator, Electrical & Electronic Engineering, MOUAU (2008–2012)
  • Postgraduate (PG) Coordinator, Department of Electrical & Electronic Engineering, MOUAU (2018–2019).

RESEARCH ACTIVITIES

SELECTED LIST OF PUBLICATIONS

 

  1. N. Okoye, O.A. Nwaorgu, C.C. Awahand E.M. Tawada, “Energy saving inverter controlled magnetic jack”, Journal of Applied Mechanics and Materials (AMM), vols. 110–116, pp. 965–970, 2012. DOI: https://doi.org/10.4028/www.scientific.net/AMM.110-116.965.
  2. C. Awah, Z.Q. Zhu, Z.Z. Wu, D. Wu and X. Ge, “Electromagnetic performance of switched flux PM machines with two separate stators,” Journal ofComputation and Mathematics in Electrical and Electronic Engineering (COMPEL [EMERALD]), vol. 35, Issue 2, pp. 376–395, 2016. DOI: https://doi.org/10.1108/COMPEL-12-2015-0440.
  3. C. Awah, Z.Q. Zhu, Z.Z. Wu, H.L. Zhan, J.T. Shi, D. Wuand  X. Ge, “Comparison of partitioned stator switched flux permanent magnet machines having single- or double-layer windings,” IEEE Transaction on Magnetics, vol. 52, no. 1, pp. 1–10, Art. ID 9500310, 2016. DOI: 10.1109/TMAG.2015.2477679.
  4. C. Awahand O.I. Okoro, “Effect of number of rotor poles on AC losses of permanent magnet machines having two separate stators,” Nigerian Journal of Technology (NIJOTECH), vol. 36, no. 4, pp. 1145–1149, 2017. DOI: http://dx.doi.org/10.4314/njt.v36i4.21.
  5. C. Awahand O.I. Okoro, “The impact of machine geometries on the average torque of dual-stator permanent magnet machines,” Nigerian Journal of Technology (NIJOTECH), vol. 36, no. 4, pp. 1150–1154, 2017. DOI: http://dx.doi.org/10.4314/njt.v36i4.22.
  6. C. Awahand O.I. Okoro, “Torque characteristics of double-stator permanent synchronous machines,” Archives of Electrical Engineering (AEE), vol. 66, no. 4, pp. 815–828, 2017. DOI: 10.1515/aee-2017-0062.
  7. C. Awah, O.I. Okoro and E. Chikuni, “Efficiency and loss prediction of double-stator PM machines,” International Journal of Power and Energy Systems (IJPES), vol. 37, no. 4, pp.129–135, 2017. DOI: 10.2316/Journal.203.2017.4.203-6328.
  8. C. Awahand O.I. Okoro, “Analysis of torque ripple and total harmonic distortion of double stator permanent magnet machine” International Journal of Power and Energy Systems (IJPES), vol. 38, no. 2, pp. 69–76, 2018. DOI: 10.2316/Journal.203.2018.2.203-0034.
  9. C. Awahand O.I. Okoro, “Double stator switched flux permanent magnet machines having low rotor pole numbers,” Nigerian Journal of Technology (NIJOTECH), vol. 37, no. 3, pp. 749–757, 2018. DOI: http://dx.doi.org/10.4314/njt.v37i3.26.
  10. C. Awahand O.I. Okoro, “Coil-and phase-flux-linkage characteristics of dual excited permanent magnet machines equipped with different winding configurations,” Nigerian Journal of Technology (NIJOTECH), vol. 37, no. 3, pp. 758–769, 2018. DOI: http://dx.doi.org/10.4314/njt.v37i3.27.
  11. C. Awahand O.I. Okoro,” Single-stator and double-stator permanent magnet machines, International Journal of Power and Energy Systems (IJPES), vol. 38, no. 3, pp. 107–114, 2018. DOI: 10.2316/Journal.203.2018.3.203-0037.
  12. C. Awahand O.I. Okoro, “The effect of winding topologies on the performance of flux-switching permanent magnet machine having different number of rotor poles” Archives of Electrical Engineering (AEE), vol. 67, no. 4, pp. 845–855, 2018. DOI: 10.24425/aee.2018.124744.
  13. C. Awah, O.I. Okoro and E. Chikuni, “Cogging torque and torque ripple analysis of permanent magnet flux-switching machine having two stators” Archives of Electrical Engineering (AEE), vol. 68, no. 1, pp. 115–133, 2019. DOI: 10.24425/aee.2019.125984.
  14. E. Nkan, O.I. Okoro, C.C.Awah and U.B. Akuru ,“Investigating the steady state stability of the Nigerian 48-bus systems using FACTS devices,” Nigerian Journal of Technology (NIJOTECH), vol. 38, no. 3, pp. 732–743, 2019. DOI: http://dx.doi.org/10.4314/njt.v38i3.27.
  15. C. Awahand O.I. Okoro,“Comparison between single and double stator permanent magnet synchronous machine,” Bayero Journal of Engineering and Technology (BJET), vol. 14, no. 2, pp. 59–66, 2019.  https://www.bayerojet.com/papers/volume-14/issue-2/comparison-between-single-and-double-stator-synchronous-machine/
  16. C. Awahand O.I. Okoro, “Fault-tolerant capability and torque-speed measurements of permanent magnet brushless AC machines,” Nigerian Journal of Technological Development (NJTD), vol. 16, no. 4, pp. 191–198, 2019. https://njtd.com.ng/paper?paper=387_294.
  17. C. Awah, O.I. Okoro, U.B. Akuru and S.E. Oti, “Inductance and flux-weakening characteristics of double-stator flux-switching permanent magnet machine,” International Journal of Power and Energy Systems (IJPES), vol. 39, no. 3, pp. 102–110, 2019. DOI: 10.2316/J.2019.203-0073.
  18. E, Oti, C. Awahand O.I. Okoro, “Review of progress in the thermal modelling of electrical machine,” Journal of Advances in Electrical Devices, vol. 5, no. 1, pp. 18–23, 2020.
  19. C. Awah, “Influence of design variables on the performance of double-stator permanent magnet machine,” Bayero Journal of Engineering and Technology (BJET), vol. 15, no. 2, pp. 97–104, 2020. https://www.bayerojet.com/papers/volume-15/issue-2/influence-of-design-variables-on-the-performance-of-double-stator-permanent-magnet-machine/
  20. C. Awah, “Development of a double-stator flux-switching machine having permanent magnets on the inner-stator,” Bayero Journal of Engineering and Technology (BJET), vol. 15, no. 3, pp. 28–34, 2020. https://www.bayerojet.com/papers/volume-15/issue-3/double-stator-flux-switching-machine-having-permanent-magnets-on-the-inner-stator/
  21. C.Awah, “Effect of permanent magnet material on the electromagnetic performance of switched-flux permanent magnet machine,” Electrical Engineering (Springer Nature Publishers), vol. 103, Issue 3, pp. 1647–1660, 2021. DOI: https://doi.org/10.1007/s00202-020-01155-8.
  22. E, Oti,C. Awah, C. Nnonyelu and O.I. Okoro, “Thermal modelling and analysis of a 10HP induction machine using the lumped parameter approach,” International Journal of Integrated Engineering (IJIE), vol. 13, no. 6, 166–179, 2021. https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/5382
  23. C. Awahand O.I. Okoro, “Leading design parameters of dual-stator permanent magnet machine,” Bayero Journal of Engineering and Technology (BJET), vol. 16, no. 2, pp. 29–36, 2021. https://www.bayerojet.com/papers/volume-16/issue-2/leading-design-parameters-of-dual-stator-permanent-magnet-machine/
  24. C. Awah,“Dual stator flux-switching permanent magnet machine with unequal number of stator teeth,” Bayero Journal of Engineering and Technology (BJET), vol. 16, no. 3, pp. 20–25, 2021.  
  25. C. Awah, “Performance prediction of magnetless direct current machine using finite element analysis,Nigerian Journal of Engineering (NJE), vol. 28, no. 2, pp. 32–38, 2021.
  26. E. Oti and C.C. Awah, “Influence of magnetic remanence and coercive force on the electromagnetic output of permanent magnet machine, Progress in Electromagnetics Research M (PIERS), vol. 109, pp. 75–88, 2022. DOI:10.2528/PIERM22012711.
  27. C. Awah, O.I. Okoro, I.E. Nkan and E.E. Okpo, “Impact of structural dimensions and poles on the torque performance of dual stator permanent magnet machine,” Nigerian Journal of Technological Development (NJTD), vol. 19, no. 1, pp. 68–79, 2022. DOI: http://dx.doi.org/10.4314/njtd.v19i1.8.
  28. C. Awah, “A new topology of double-stator permanent magnet machine equipped with AC windings on both stators,” Archives of Electrical Engineering (AEE), vol. 71, no. 2, pp. 283–296, 2022. DOI:10.24425/aee.2022.140711.
  29. C. Awah, O.I. Okoro, G.C. Diyoke and A.J. Onah, “Influence of design elements on the induced-EMF and flux linkage of double stator permanent magnet machine,” Nigerian Journal of Engineering (NJE), vol. 29, no. 1, pp. 9–14, 2022.
  30. J. Onah,C.C. Awah and G.C. Diyoke, “Speed control of direct current (DC) motors,” Nigerian Research Journal of Engineering and Environmental Sciences (RJEES), vol. 7, no. 1, pp. 319–329, 2022, DOI:  http://doi.org/10.5281/zenodo.6726399.
  31. C. Awah, O.I. Okoro, A.J. Onah and G.C. Diyoke, “Estimation of losses and efficiency of double stator switched flux permanent magnet machine,”Nigerian Journal of Technological Development (NJTD), vol. 19,  no. 2, pp. 150–155, 2022. DOI: doi: http://dx.doi.org/10.4314/njtd.v19i2.7.
  32. C. Awah, “Performance comparison of double stator permanent magnet machines,” Archives of Electrical Engineering (AEE), vol. 71, no. 4, pp. 829–850, 2022. DOI 10.24425/aee.2022.142111.
  33. C. Awah, “Influence of magnetic properties on the performance of dual stator electric machine: Part I,” Journal of Engineering and Applied Sciences (JEAS), vol. 21, no. 1, pp. 866–875, 2022.
  34. C. Awah, “Influence of magnetic properties on the performance of dual stator electric machine: Part II, Journal of Engineering and Applied Sciences (JEAS),vol. 21, no. 1, pp. 876–885, 2022.
  35. C. Awah, “Loss and efficiency comparisons of permanent magnet machine having double stator structure,” Nigerian Journal of Engineering (NJE), vol. 29, no. 2, pp. 33–39, 2022.
  36. C. Awahand O.I. Okoro, “Energy audit at Michael Okpara University of Agriculture, Umudike (MOUAU): a need for an energy efficiency programme”, in Proceedings of International Conference on Domestic Use of Energy (DUE), Cape Peninsula University of Technology, South Africa, 29–31 March 2010, pp. 123–128.
  37. N. Okoye, C.C. Awah, O.A. Nwaorgu and E.M. Tawada, “Neural network controlled hydraulic transmission with secondary regulation feeding regenerative potential energy to the mains,” in Proceedings of 52ndNational Conference on Fluid Power (NCFP), Las Vegas, Nevada, USA, 23–25 March, 2011, pp. 615–621.
  38. N. Okoye, O.A Nwaorgu, C.C. Awahand E.M. Tawada, “Design and development of intelligent uninterrupted hydraulic hybrid power supply modules for space vehicles using neural network controlled multiple regenerated power storage unit,” in Proceedings of 52nd National Conference on Fluid Power (NCFP), Las Vegas, Nevada, USA, 23–25 March, 2011, pp. 663–667.
  39. C. Awah, Z.Q. Zhu, Z.Z. Wu and D. Wu, “High torque density magnetically-geared switched flux permanent magnet machines,” in Proceedings of IEEE International Conference on Ecological Vehicles and Renewable Energies, Monaco, 31 March–2 April, 2015, pp. 1–6. DOI: 10.1109/EVER.2015.7112948.
  40. C. Awah, Z.Q. Zhu, Z.Z. Wu, J.T. Shiand D. Wu, “Comparison of partitioned stator switched flux permanent magnet machines having single- and double-layer windings,” in Proceeding of IEEE International Conference on Ecological Vehicles and Renewable Energies, Monaco, 31 March–2 April, 2015, pp. 1–5. DOI: 10.1109/EVER.2015.7112949.
  41. C. Awahand Z.Q. Zhu, “Comparative study of high performance double-stator switched flux permanent magnet machines,” in Proceedings of the 13th IEEE Vehicle Power and Propulsion Conference (VPPC2016), Zhejiang University, Hangzhou, China, 17–20 Oct. 2016, pp. 1–6. DOI: 10.1109/VPPC.2016.7791632.
  42. C. Awahand Z.Q. Zhu, “Influence of rotor pole number on electromagnetic performance of double-stator switched flux PM machines,” in Proceedings of the 13th IEEE Vehicle Power and Propulsion Conference (VPPC2016), Zhejiang University, Hangzhou, China, 17–20 Oct. 2016, pp. 1–6. DOI: 10.1109/VPPC.2016.7791709.
  43. C. Awah, O.I. Okoro and E. Chikuni, “The impact of design parameters on the average torque of double-stator switched flux PM machines,” in Proceedings of the International conference for research, innovation and development for Africa (ACRID), 20–21 June 2017, Victoria Falls, Harare, Zimbabwe, pp. 120–129. DOI: https://doi.org/10.4108/eai.20-6-2017.2271002.
  44. C. Awah, O.I. Okoro and E. Chikuni, “Analysis of double-stator switched flux PM machines with non-overlapping concentrated windings,”in Proceedings of the International conference for research, innovation and development for Africa (ACRID), 20–21 June 2017, Victoria Falls, Harare, Zimbabwe, pp. 130–138. DOI: https://doi.org/10.4108/eai.20-6-2017.2271005.
  45. Chikuni, S. Arendese, O.I. Okoro, C.C. Awahand O. Dzobo, “Probabilistic design of distribution and reticulation systems juxtaposed with traditional design software,” in Proceedings of the International conference for research, innovation and development for Africa (ACRID), 20–21 June 2017, Victoria Falls, Harare, Zimbabwe, 191–198. DOI: https://doi.org/10.4108/eai.20-6-2017.2271003.
  46. C. Awahand O.I. Okoro, “Performance comparison of all- and alternate-pole-wound double-stator PM machines with concentrated coils,” in Proceedings of the 2017 IEEE 3rd International Conference on Electro-Technology for National Development (NIGERCON), FUTO, Owerri, 7–10 Nov. 2017, pp. 834–838. DOI: 10.1109/NIGERCON.2017.8281951.
  47. C. Nwaneto, U.B. Akuru, P.I. Udenze, C.C. Awah and O.I. Okoro, “Economic implications of renewable energy transition in Nigeria” in Proceedings of International Conference on Industrial and Commercial Use of Energy, Cape Town, South Africa, 13–15 Aug. 2018, pp. 229–236. https://ieeexplore.ieee.org/document/8636602.
  48. E. Nkan, O.I. Okoro,  C.C. Awah and U. B. Akuru, “Investigating the dynamic stability of the Nigerian 48-bus systems for improved system performance using FACTS in Proceedings International Conference on Domestic Use of Energy (DUE), Cape Peninsula University of Technology, Wellington, South Africa, 25–27 March 2019, pp. 34–42. https://ieeexplore.ieee.org/document/8734364.
  49. E. Okpo, O.I. Okoro, U.B. Akuru, and C.C. Awah,“Performance evaluation of 5.5KW six-phase asynchronous motor” in Proceedings of IEEE PES / IAS Power Africa Conference, Abuja, 20–23 Aug. 2019, pp. 1–6. 10.1109/PowerAfrica.2019.8928729.
  50. E. Nkan, O.I. Okoro, P.I. Obi, C.C. Awah, and U.B. Akuru, “Application of FACTS devices in a multi-machine power system network for transient stability enhancement: A case study of the Nigerian 330kV 48-bus system,” in Proceedings of IEEE AFRICON, Accra, Ghana, 25–27 Sept. 2019, pp. 1–9, doi: 10.1109/AFRICON46755.2019.9133904.
  51. E. Okpo, O.I. Okoro, C.C. Awah, and U.B. Akuru, “Investigating the dynamic behaviour of a six-phase induction motor under unbalanced faults,” in Proceedings of IEEE PES/IAS PowerAfrica, Nairobi, Kenya, 25–28 Aug. 2020, pp. 1–5, doi: 10.1109/PowerAfrica49420.2020.9219819.
  52. C. Awah, “Electromagnetic performance of a two-stator permanent magnet machine,” in Proceedings of  International Conference on Technological Innovation for Holistic Sustainable Development (TECHISD2020), UNN, Nsukka, Nigeria, Sept. 2020, pp. 14–20. https://lgt-unn.unn.edu.ng/wp-content/uploads/sites/219/2021/04/Electromagnetic-performance-of-a-two-stator-permanent-magnet-machine.pdf.
  53. C. Awah, “Speed and load characteristics of two-stator permanent magnet machine,” in Proceedings ofInternational Conference on Technological Innovation for Holistic Sustainable Development (TECHISD2020), UNN, Nsukka, Nigeria, Sept. 2020, pp. 21–27. https://lgt-unn.unn.edu.ng/wp-content/uploads/sites/219/2021/04/Speed-and-load-characteristics-of-two-stator-permanent-magnet-machine.pdf
  54. I. Okoro, C.C. Awahand E. Chikuni,” Influence of electric loading and rotor speed on the performance of permanent magnet machines,” AIUE Proceedings of the XVIII Industrial and Commercial Use of Energy Conference, Cape town, South Africa, 23rd–24th Nov. 2020, pp. 93–99. Doi: http://dx.doi.org/10.2139/ssrn.3736600.
  55. C. Awahand O.I. Okoro,” Permanent magnet machines with two stators: a comparative analysis,” AIUE Proceedings of the XVIII Industrial and Commercial Use of Energy Conference, Cape town, South Africa, 23rd –24th Nov. 2020, pp. 100–105. https://ssrn.com/abstract=3736646.
  56. C. Awahand O.I. Okoro, “Loss and efficiency assessment of a dual-stator permanent magnet machine, in Proceedings of the 10th Annual and International Conference of the Renewable and Alternative Energy Society of Nigeria, UNN, Nsukka, Nigeria, March 23–26, pp.1–7, 2021.
  57. C. Awah, “Finite element performance prediction of a direct current electric machine without permanent magnets,” Proceedings of the 2021 Sustainable Engineering and Industrial Technology Conference, UNN, Nsukka, Nigeria, 22–25 June 2021, pp. 1–5.
  58. F. Mashala, U.B. Akuru, O. I. Okoro and C.C. Awah, “Field evaluation and testing of wind turbine earthing resistance: A case study of soetwater,” in Proceedings of IEEE PES/IAS Power Africa Conference, Nairobi, Kenya, 23–27 Aug. 2021, pp. 1–5. Doi: 10.1109/PowerAfrica52236.2021.9543198.
  59. C. Awah, “Influence of magnetic properties on the performance of dual stator electric machine: Part I,” Faculty of Engineering International Conference (FEIC), UNIZIK, Nigeria, 9th–10th February 2022, pp. 531–543.
  60. C. Awah, “Influence of magnetic properties on the performance of dual stator electric machine: Part II,” Faculty of Engineering International Conference (FEIC), UNIZIK, Nigeria, 9th–10th February 2022, pp. 544–558.
  61. C. Awah, “Magnet varieties and its characteristics on the performance of dual stator permanent magnet machine,” in Proceedings of IEEE Nigeria 4th International Conference on Disruptive Technologies for sustainable Development  (NIGERCON), Abuja, Nigeria, 17th – 19th May 2022, pp. 1–5, Doi: 10.1109/NIGERCON54645.2022.9803136.
  62. C. Awah, “Magnetic materials’ impact on loss and efficiency profiles of dual stator permanent magnet machine,  in Proceedings of IEEE Nigeria 4th International Conference on Disruptive Technologies for Sustainable Development  (NIGERCON), Abuja, Nigeria, 17th – 19th May 2022, pp. 1–5, Doi: 10.1109/NIGERCON54645.2022.9803145.

Completed Research / Thesis

  1. CC Awah(2016): Novel double stator switched flux permanent magnet machines, PhD Dissertation, University of Sheffield, UK.

Major Supervisor: Prof. Z.Q. Zhu

Minor Supervisor: Prof. Martin Foster

 

  1. CC Awah(2009): Modelling of asynchronous machine with saturable inductances, Master of Engineering (M.Eng.) Thesis, University of Nigeria, Nsukka.

Supervisor: Engr. Prof. O.I. Okoro

 

  1. CC Awah(2005): Application of MATLAB to electrical network transient problems. Bachelor of Engineering (B.Eng.) Project. University of Nigeria, Nsukka.

Supervisor: Engr. Prof. O.I. Okoro

 

On-going Research

  • Design and analysis of double-stator permanent magnet
  • Design and analysis of magnet less flux switching permanent magnet machines.
  • Modeling and control of permanent magnet synchronous machines.

 

Other Academic Activities

  • Reviewer of the following Journals:
  • IEEE Transactions on Magnetics
  • IEEE Transactions on Industrial Electronics
  • IEEE Transactions on Vehicular Technology
  • IEEE Journal of Applied Superconductivity and Electromagnetic Devices
  • IEEE Journal of Emerging and Selected Topics in Power Electronics
  • IET Electric Power Applications
  • The International Journal for Computation and Mathematics in Electrical and Electronic Engineering(COMPEL)
  • Progress In Electromagnetics Research (PIER)
  • Archives of Electrical Engineering (AEE)
  • China Electrotechnical Society Transactions on Electrical Machines and Systems (CESTEMS)
  • The South African Institute of Electrical Engineers African Research Journal (SAIEE)
  • Nigerian Journal of Technology (NIJOTECH)
  • Nigerian Journal of Technological Development (NJTD).

 

  • Managing Editor, Umudike Journal of Engineering and Technology (UJET).
  • Editorial Board Member, Smart Science, Taylor and Francis Publishers.

 

Scholarships Obtained

  1. Commonwealth Scholarship, UK (2012–2016)
  2. Federal Government of Nigeria Scholarship for Undergraduate Students (2002/2003 session)

 

SPECIAL RESEARCH SKILLS

  • High competency in the use of finite element analysis (FEA) software: ANSYS-MAXWELL, FLUX (CEDRAT), etc.
  • In-depth knowledge in simulation techniques and the use of technical simulation software: MATLAB/SIMULINK, ANSOFT, SIMPLORER, ELECTRONIC WORKBENCH, etc. applications.
  • High computer literacy

 

RESEARCH INTERESTS

  • Design and analysis of electrical machines.
  • Dynamic modeling of electrical machines and drives.

 

LANGUAGES

  • Igbo (Mother tongue)
  • English (High proficiency)

 

HOBBIES

  • Intellectual discourse
  • Reading
  • Footballing

 

Membership of Professional Bodies:

  • Institute of Electrical and Electronics Engineering (IEEE), USA Senior 
  • Nigerian Society of Engineers (NSE) 
  • International Association of Engineers (IAENG)
  • COREN Registered Electrical Engineer 

 

CAREER OBJECTIVE

To work and play an active role in a dynamic and challenging work environment, having opportunity to enhance and share my knowledge, experience and communication skills towards making a positive difference and improving my skills into a world class standard.